זחלן Rock Crawler מבית AXIAL יש להוסיף סוללה ומטען


1850 
  • מק"ט / ברקוד:: AXI90074

קרא עוד


הערכה אינה כוללה סוללה ומטען

מומלץ להשתמש בסוללת LIPO 7.4v 5200MAH (עלות 220 ש"ח )

מטען מהיר לסוללות  (200 שח / 450 ש"ח משופר)

מד סוללות (60 ש"ח)

Product Details

 

In The Box
  • (1) Axial Wraith 1.9 1/10 4WD RTR
  • (1) Spektrum™ SRX200 Receiver (installed)
  • (1) Tactic® TSX45 Metal Gear Servo (installed)
  • (1) Axial® 35T Electric Motor (installed)
  • (1) Dynamite® Electronic Speed Control with Drag Brake (installed)
  • (1) Spektrum™ STX2 Transmitter
  • (1) Product Manual

 

Needed to Complete
  • (1) 2-3 Cell LiPo or 5-9 Cell NiMH/NiCd battery with EC3™ or IC3™ connector
  • (1) Compatible battery charger
  • (4) AA Batteries for Transmitter

Introduction

The Axial® Wraith™ 1.9 4x4 is a new, 1/10 scale, ready-to-run platform that delivers it all - technical rock crawling prowess and detailed scale looks. Take the wheel and take command over mud, rocks, sand, and through any kind of backyard terrain!

Features

  • Strong tube chassis with forward-mounted battery position
  • Boatsides/skid plate for extra clearance
  • Chassis-mounted servo for a realistic look
  • Easy access to electronics, and adjustable battery tray
  • New body design with LED lights, and grille, radiator, fender, and V8 engine details
  • Spektrum™ Transmitter and Receiver
  • Licensed 1.9 Nitto Trail Grappler M/T tires on KMC XD229 Machete crawl wheels
  • Compact AX10™ transmission
  • AR44™ hi-pinion axles for added ground clearance
  • WB8 HD Wildboar™ driveshafts
  • Dual slipper clutch with 32-pitch gearing
  • 4-Link rear suspension

Overview

At its foundation the Axial Wraith 1.9 4x4 is the first full tube frame chassis in RC, providing the durability you need for aggressive action on tough terrain. Refining the proven 2.2 Wraith chassis design, Axial improved the ground clearance for this version by reducing the size of its skid plate and lower rails. Boatsides on the skid plate improve handling by helping the vehicle slip through and past obstacles.

Your battery mounts at the front of the chassis, for easy access and to provide the best weight distribution for aggressive climbing. For scale looks, Axial moved the servo off the top of the axle and onto the chassis - just as a full-size truck has its steering box located on the frame.

The Wraith 1.9 truck's drivetrain uses a powerful brushed 540 motor to turn its proven front and rear, single piece AR44™ axles. The pinion gear is 6mm above center, raising the ground clearance and improving driveshaft angles. Axial boosts the overall strength with metal gear construction; large, flex-reducing load bearings; increased gear surface contact; and a gear ratio that's optimized to reduce torque twist.

Adjustable oil-filled, coil over shocks allow you to tune dampening for the best handling on any track. Molded from durable S30 compound, the officially licensed Nitto Grappler tires have a large block tread that gets excellent bite on a wide range of surfaces.

The Wraith 1.9 truck looks ready to climb mountains even when it's standing still. At the front end of its polycarbonate body you'll find a molded plastic grille, radiator detail, and two large, LED-equipped headlights. Raise the hood and you'll see a replica V8 engine tucked in front of the chassis battery mount. That V8 isn't just for show. It's also a rugged receiver box that guards the model's Spektrum™ SRX200 receiver from water, dust, and debris.

The Axial Wraith 1.9 RTR comes factory-assembled and requires only a battery pack with IC3™ connector, compatible battery charger, and four AAs for the included Spektrum 2.4GHz transmitter. It's easy enough for new RC hobbyists, with the design sophistication to take experienced drivers on incredible adventures far beyond the end of the road.


Product Specifications

Ball Bearings
Full set included
Chassis
Full tube frame constructed of high-strength impact resistant composite plastic, new chassis design moves battery tray to front for easier access and better weight distribution, new lower rails and skid plates are narrower for added clearance
Completion Level
Ready-To-Run
Drivetrain
4WD
Product Height
8.8" (224 mm)
Tire Compound
Sticky R35 firmness compound
Wheel Hex Size
12mm
Pinion
13T
Body
Molded polycarbonate with plastic grille and molded plastic inner fender wells
Approximate Assembly Time
No assembly required
Charger
Sold Separately
Differential
Bevel gear
Receiver
Included
Wheel Type
KMC XD229 Machete
Scale
1/10
Product Width
8.8" (224 mm)
Radio
Included
Final Drive Ratio
42:1
Motor Type
Brushed
Speed Control
Included
Wheelbase
12.13" (308 mm)
Product Weight
4.65lb (2.1kg)
Tire Tread
Grappler
Vehicle Type
Rock Crawler
Water-Resistant
Yes
Power Type
Electric
Gear Pitch
32-Pitch
Battery
Sold Separately
Internal Gear Ratio
2.6:1
Motor Size
540
Product Length
17.8" (452 mm)
Spur Gear
56T
Steering Type
2WS
Wheel Width
1.2" (26mm)